Dormakaba TP/TA EASY Safe Montageanleitung - Seite 14

Blättern Sie online oder laden Sie pdf Montageanleitung für Inneneinrichtung Dormakaba TP/TA EASY Safe herunter. Dormakaba TP/TA EASY Safe 20 Seiten.

Seite drucken

dormakaba mounting instructions

Note

65/55 mm DP = panel width - 4.5 mm

20 mm DP = panel width - 18 mm

Fig. 32

65/55 mm DP

Fig. 33

20 mm DP

2. Align the bottom rail according to the unit

drawing on the floor and on the ceiling.

3. Mark the drill holes and drill the holes.

4. Use suitable screws and dowels to secure the

bottom rail.

Fig. 34

Mounting the bottom rail

5. Laterally slide the side panel onto the bottom rail

at the top and bottom.

6. Align the side panel with a distance of 5 mm to

the wall.

TP/TA EASY Safe

Panel width

Panel width - 4.5

Panel width

Panel width - 18

WN 060028 45532

Note

The screws for securing the side panel are

not included.

The screw heads must end flush with the

door rail.

Drill and screw the door rail and the bottom rail

at the bottom on the left and right.

Fig. 35

Screwing the door rail

4.9

Aligning the side panel

See Chapter 4.6

4.10 Mounting the cover profiles

Note

The recesses for the door strap or the lock

module, for example, are already provided in

the cover profiles.

To ensure the cover profile fits firmly, bend the clip

cam at 3-4 points along the cover profile's length

if necessary.

Bending the clips cam

Fig. 36

2. Insert a slotted screwdriver between the rubber

seal and the cover profile and turn it.

‣

The clip cam is bent upwards.

3. Insert the rubber seal in the cover profile across

the entire length.

Mounting

2020-11