AL Guardian G9 RX Benutzerhandbuch - Seite 3
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Automobilelektronik AL Guardian G9 RX herunter. AL Guardian G9 RX 20 Seiten.

Important Safety Instructions
READ BEFORE OPERATING
This product was designed and manufactured to meet strict quality and safety standards. There are,
however, some installation and operation precautions which you should be particularly aware of.
Therefore read, keep and follow these guidelines during installation and use:
Take special care while installing the sensor head. Damaging the cable or the factory installed
connector on the cable may cause malfunction and will void warranty.
While the sensor is water resistant and intended to be installed on the outside of the vehicle, the control
box and it's connections must be made and kept in a dry area, preferably the passenger cabin.
Warranty will be deemed invalid if failures are caused by improper installation.
Do not plug more than four outer sensors into the control box. Do not plug any third party equipment
into any of the sockets in the control box. Do not plug any part of the AL G9 into third party equipment.
Doing so may cause fire or damage to the unit and voids warranty.
Since AL G9 operates on a different voltage it is NOT to be mixed with AL G8 components.
would cause characteristic failure of the unit and voids warranty.
It will take time to get acquainted with the range of the parking sensor, which can vary from 0 to 3
meters, from your car to the obstruction. Therefore rely on your personal judgment.
AL G9 can NOT detect glass or other transparent objects.
During warm-up mode (first 60 seconds of operation) AL G9 functions are limited.
While driving, especially in winter months, dirt and filth can accumulate on the outer sensor lens, which
can affect the sensor's performance. Wipe the lens periodically with a dry or moist cloth. Do not use
cleaning solvents other than water.
Laser signals emitted from AL G9 can cause interference to other laser equipment. If such a case is
detected by the unit the system will reset within few seconds.
If the vehicle where AL system is to be installed is already using another laser system (for instance
laser cruise control, or similar) two systems could interfere with each other. Such vehicles may not be
suitable for use of AL system.
Use of laser products may be regulated by your local laws. Check your local laws before using this
product.
Special caution
AL G9 laser sensor emits an invisible laser beam that can be harmful to sight. Never, under any
circumstances look at the sensor while it is operating.
Doing so