1B PARAGON Handbuch für Gebrauch und Pflege - Seite 7

Blättern Sie online oder laden Sie pdf Handbuch für Gebrauch und Pflege für Kochfeld 1B PARAGON herunter. 1B PARAGON 12 Seiten.

Cooking in Precise Mode

1. Press and hold the button on the right side of the

probe until the bluetooth symbol blinks 3 times. When

the probe is sucessfully synced, the symbol will begin to

blink every 5 seconds. The cooktop will ﬂash "SYNC" and

beep as well, and will automatically go into Rapid Precise

Mode.

2. Attach the probe onto the side of the pot, making

sure that the probe tip is submerged into the liquid

you are cooking. If the probe tip loses contact with

the liquid at any time during the cooking process,

your food will not properly cook. (The ﬁrst few inches

of the silicone strap can enter the liquid being cooked

if needed.)

3. Set temperature on the cooktop using the + and -

buttons. Available temperatures in this mode are

between 80 degrees & 375 degrees Fahrenheit. The

temperature intially displayed will be the last set

temperature. Use extra care when above 200 ºF.

4. When desired temperature is selected, press the

"Start/Stop" button to begin the cooking cycle. When

your target temperature is reached, the cooktop will

hold the temperature and ﬂash "REDY"

Note: Temperature displayed will be Fahrenheit by default. Hold + & - simultaneously for 3 seconds to change to Celsius

Turning Probe O

When cooking is ﬁnished, press and hold the button

on the right side of the probe until the bluetooth icon

ﬂashes three times. When the bluetooth symbol stops

ﬂashing the probe is turned o . Your cooktop will switch

back to Direct Mode when this

happens.