Asus ET2300IUTI Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Desktop Asus ET2300IUTI herunter. Asus ET2300IUTI 8 Seiten.

Entering the BIOS Setup

Windows

8 boot time is quite fast, so we developed three ways for you to quickly access

the BIOS (Basic Input and Output System), which stores system hardware settings that are

needed for system startup in your All-in-one PC.

To quickly access the BIOS, do any of the following:

•

When your All-in-one PC is off, press the power button for at least four (4) seconds to

access the BIOS directly.

•

Press the power button for at least four (4) seconds to shut down your All-in-one PC,

then press the power button again to turn your All-in-one PC back on, and press <F2>

during POST.

•

When your All-in-one PC is off, disconnect the power cord from your All-in-one PC's

power connector. Reconnect the power cord and press the power button to turn on your

All-in-one PC. Press <F2> during POST.

NOTE: POST (Power-On Self Test) is a series of software controlled diagnostic tests that run when

you turn on your All-in-one PC.

WARNING! Inappropriate BIOS settings may result to instability or boot failure. We strongly

recommend that you change the BIOS settings only with the help of a trained service personnel.