Dot-x DNR V SERIES Benutzerhandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Monitor Dot-x DNR V SERIES herunter. Dot-x DNR V SERIES 10 Seiten. 25 inch display
Auch für Dot-x DNR V SERIES: Benutzerhandbuch (12 seiten)

Seite drucken

INSTALLERS MENU ADJUSTMENTS

scan. In scan modes 1,3 the power On/Off could be changed with Start Ch SM=1

Factory items and Start channel.

Scan Mode Characteristics

0 AUX, TV, VCR3, VCR4

1 AUX, TV, VCR3, VCR4, ON/OFF

17 TEXT MODE: Turns text mode on or off in the users menu. Range is 0-1. Zero

is off and one is on. In on mode, user can call up text mode. Set to 0 unless text

is being used.

18 SLEEP TIMER: Enables sleep timer key. Range is 0-1. Zero is off and 1 is on.

19 ALARM: Enables Alarm Key. Range is 0-1. Zero is off and 1 is on.

20 CH OVER RIDE: Zero is off, one is on. In on mode, the display works normally.

This item is generally set to off so it can be controlled with entertainment unit. In

off mode, Auto Program and Channel Add/Delete do not function.

21 OLD OCV: (On Command Video) Not used.

22 CAPTION LOCK: Zero is off, 1 is on. Set to 1 for operation to restore previous

on/off state after display is initially turned on.

23 FUNCTION PRE: (Function Menu Channel Preview) Range is 0-1. Zero is off

and one is on. Set to 1 to suppress channel preview screen in the function menu

for some pay per view systems.

24 FEATURE LEVEL: Not used.

25 TRAP 3.58: Zero is off, one is on. Set to 1 for normal display operation. Set to

0 if Y/C is used or chassis has a comb filter.

26 RF BAND PASS: Sets adjustment range of the customer control for brightness

in therefore mode. Range is 0-1. Set to 1.

27 RF BRT: (RF brightness) Sets adjustment range of customer control for

brightness in RF mode. Range is 0-63. A typical value is 30.

28 AUX BRT: (Auxiliary Brightness) Sets adjustment range of the customer control

for brightness in AUX mode. Range is 0-63. Typical value is 30.

29 MAX CONTRAST: Sets adjustment range of customer control for contrast.

Range is 0-63. Typical value is 63.

30 VERT SIZE: (Vertical Size) Range is 0-254.

31 HORZ SIZE: (Horizontal Size) Range is 0-254.

32 VERT PHASE: (Vertical Phase) Range is 0-7.

33 HORZ PHASE: (Horizontal Phase) Range is from 0-31.

34 AUDIO LEVEL: Sound Attenuation range is 0-63.

2 AUX, TV, VCR3, VCR4, FM

3 AUX, TV, VCR3, VCR4, FM, ON/OFF

INSTALLERS MENU ADJUSTMENTS

35 RF AGC: (Rf Automatic Gain Control) Range is from 0- 63. 48 is a general

setting. Tune in weakest available channel and adjust for a snow-free picture.

36 HORZ AFC: Range is 0-1. Set to 0. O=AFC2 Normal. 1=AFC2 X 3.

37 WHITE COMPRESS: (White Compression) The range is 0 to 1. Set to 0. 0 =

Enable and 1 = Disable.

38 60HZ SW: (60 Hertz Switched) The range is 0 to 2.

39 PIF VCO: ( PIF Voltage Controlled Oscillator ) . Range is 0-127.

40 RED CUT: B&W tracking adjustment. Range is 0-254. Typical value is 20.

41 GREEN CUT: B&W tracking adjustment. Range is 0-254. Typical value is 0.

42 BLUE CUT: B&W tracking adjustment. Range is 0-254. Typical value is 28.

43 GREEN GAIN: B&W tracking adjustment. Range is 0-254. Typical value is 45.

44 BLUE GAIN: B&W tracking adjustment. Range is 0-254. Typical value is 70.

45 6 KEY SYSTEM: Keyboard type. Set to 1 for 6 key and 0 for 10 key. Range 0-1.

46 A ATT: Audio Attenuation adjustment.

47 A VCO: (Voltage-Controlled Oscillator) range is 0-63. Typical value range 10-

39.

48 A FILTER: (Second Audio Program Voltage-Controlled Oscillator) Stereo,

SAP, and dBx filter adjustment. Range is from 0-63.

49 A SPECTRL: Adjustment of stereo separation (3kHz). Range is 0-63.

50 WIDE BAND: Adjustment of stereo separation (300kHz). Range is 0-63.

51 MAX BLK HRS: Determines the maximum block hours that V-chip could be

programmed. Range is 0-99.

52 STRT CH SM: Enable start channel at scan mode. Range is 0-1.

53 RADIO: Enable or disable the access to radio function.

54 AUX: Enables the access to auxiliary input.

55 VCHIP: Enable the V Chip Function.

56 MUTE DISABLE: If it is enabled (set to 1) it disables the functionality of the Mute

Key.

57 EN LA7222: Used in Conceirge Models to enable separate auxiliary inputs

(Camport and Rear Auxiliary)