DAGE-MTI CCD-100 Benutzerhandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Sicherheitskamera DAGE-MTI CCD-100 herunter. DAGE-MTI CCD-100 17 Seiten. Camera system

ENHANCE

This pot determines the sharpness of the output picture.

To sharpen the picture, rotate the pot to the right. In low light

situations where the gain of the camera is high, it may be

better to not use as much enhancement since it also increases

the amount of noise in the output picture.

GAMMA

Gamma is a non-linear process added to the output video

to compensate for the characteristics of a monitor. When

GAMMA

contrast, while the whites will be compressed. If the camera

is being used for measurement purposes, the

be in the

OFF

POLARITY

In certain situations, it may be convenient to reverse the

output video image. When the

output video is normal. In the

inverted, with blacks being white and whites being black.

REMOTE

connector to the

connector such as Dage P/N 738129-02.

, the blacks will tend to be stretched in

position.

This 8 pin connector allows the rear panel

functions to be remoted. Care should be

taken to insure the placement of the rear

panel controls to the

positions as indicated in the table when

remoting the functions. The mating

REMOTE

switch is set to

POL

position, the video is

NEG

REMOTE SET

port is a male 8-pin mini-DIN

should

GAMMA

, the

POS