Double Apex MK7 Garage Control Installationshandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Installationshandbuch für Zubehör für Kraftfahrzeuge Double Apex MK7 Garage Control herunter. Double Apex MK7 Garage Control 17 Seiten. Garage control

Seite drucken

Step 1: Programing The Control Box

. Determine the type of garage door opener you have, smart/learn

or dip switch. Smart/learn units will have a colored button on the

motor unit (Figure A). Dip switch units will have a series of switches

(Figure B). Temporarily insert the included coin battery, + side up. If

you have smart/learn model continue to the next step. If you have a

dip switch model skip to step 1A.

2. Find your brand opener in Appendix A and note the number of

times to press the button on the control box.

3. Make sure your garage door is closed. Press and hold the pro-

gram button in the control box until the LED illuminates. (Figure C)

4. Press and release the smart / learn button on the opener motor

unit (Figure A).

Required Tools:

1. Small Phillips head driver

2. Small flat heat driver

3. Plastic trim pry tool

4. T30 Torx wrench

Figure B

Photo A

Figure A

Figure C