Electra VPM.1FR02 Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Intercom System Electra VPM.1FR02 herunter. Electra VPM.1FR02 12 Seiten. Video outdoor panels (1 – 5 families) for tl door phone systems

Seite drucken
3
Functions of the video outdoor panels
EN
Build features:
Solid mechanical construction, built in embedded technology, with chemically toughened glass.
Weatherproof, waterproof and with an operating temperature range between -30º...+ 60º C.
Electronic anti-condensation system for the video camera screen.
Anti-theft sensor that is activated during unauthorized unmounting from the wall.
Day/night sensor for the command of TOUCH keyboard backlighting and the lighting of the IR LEDs and IR-CUT.
TOUCH keyboard with the name of the resident, backlighted during night.
1/3 CMOS, 900TVL color video camera and IR LEDs for b/w image during night.
Blinking red LED, signaling the presence of potential video monitoring from the panel.
In-built RFID reader. Access by secured RFID tag/card.
Allows the connection of a DVR, for extended monitoring and video recording from the panel.
Settings/Programming
Programming and deletion of RFID building access tags/cards.
Programming of new address 2, 3 or 4, for parallel connected panels, in case of buildings with multiple entrances.
(maximum 4 outdoor panels for one building).
Enabling or disabling of video monitoring signaling (Red LED ON/OFF), through the JP1: RED LED/0. (ch. 4.1-step 4)
Enabling or disabling DVR video recording (ON/OFF) through the jumper JP40: 1-2 (OFF) / 2-3(ON) (ch. 4.1)
Extensions
Allows the parallel connection of maximum 4 outdoor panels, through a video selection box (VSB).
Allows the connection of an additional video camera directly to the central supply unit (SCU), or of 4 additional
video cameras, through a video selection box (VSB).
4
Recommended cables. Installation.
EN
The outdoor panel is mounted on the wall at a height of 1.60 m from the upper edge of the panel (see page 1).
Depending on the maximum distance between the outdoor panel and the last terminal in the installation, the recommended
cables are the following:
Option 1) 4 wires x 0.5 mm (type H03VV-F4G 0.5) for maximum 75 lm
Option 2) 4 wires x 0.75 mm (type H05VV-F4G 0.75) for maximum 150 lm
Connections
to the VPM
outdoor panel
*Important:
Maintain the same colors for the same connections.
Example: +U = Red, C/D = Blue, GND = Black, Vin/Vout = Green.
For electrical safety reasons, we recommend installing an earthing cable between the panel and the SCU, connected to an
earth grounding (ISO - IEC 60950-1:2005)
Option 3) UTP cat5e (AWG24) or UTP cat6e (AWG23), for maximum 250 lm
The wires will be arranged as per the below table:
Connections
to the VPM
outdoor panel
2
2
25-30mm
6mm
+U
C/D
GND
Vout
25-30mm
6mm
+U
C/D
GND
UTP cat5e (AWG24)
Vout
UTP cat6e (AWG23)
25-30mm
6mm
+U
C/D
Connections
to the SCU
GND
central supply unit
Vin
25-30mm
6mm
+U
Connections
C/D
to the SCU
central supply unit
GND
Vin
EN
2