Double K Industries 9000 II Gebrauchsanweisung

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Trockner Double K Industries 9000 II herunter. Double K Industries 9000 II 4 Seiten. Animal dryer

Seite drucken

REQUIRED MAINTENANCE

FILTERS:

(The maintenance obligations below must be performed on a regular basis or as needed to

protect warranty status)

If the lters become heavily coated with hair and/or dirt, it will reduce the air output of your

dryer and can cause damage to the motor or cause the motor to overheat.

*Never operate the dryer without lter in place.

Filter Cleaning: The top lter may be cleaned after each use by wiping away hair that is on

the lter. The lter must periodically be shaken out, or vacuumed o to remove excessive dirt,

hair and dander that is in the lter. The lter may also be washed with water and mild soap. Let

dry completely before installing back on the dryer. (Never run dryer without lter in place.)

Cleaning Dryer Interior: Dust will accumulate inside the dryer. Blow clean as needed using a

Challengair Forced Air Dryer or suitable high pressure air outlet.

Any maintenance not explained in this manual should be performed by Double K Industries,

or an Authorized Service Center. Call Double K Industries for the name of an Authorized

Service Center nearest you. All warranty service must be performed by an Authorized Service

Center (or Double K Industries) to protect your warranty status.

Instructions for Changing the Arm Extension Sleeve (PN 7046A)

and Arm Nozzle (PN 7007) on 9000 Series Dryers

*Use of Safety Gloves is advisable as internal metal components may have small burrs that can cut bare skin.

Carefully remove the Nozzle Retaining Screw (PN 7073)

from your Dryer Assembly and put it aside.

Pull rmly on the Arm Extension Sleeve (PN 7046A) to

remove it.

Slide the replacement Arm Nozzle back over the Arm

Extension Sleeve.

Pull rmly on the Arm Nozzle (PN 7007) to disengage it

from the Arm Extension (PN 7045). Heating with hair

dryer may ease this process.

Push on the replacement Arm Extension Sleeve that is

included in your Arm Nozzle Replacement Kit.

Reinstall the Nozzle Retaining Screw. Drive the screw

until it contacts the metal groove underneath. Do not

over-tighten.

Animal Dryer

INSTRUCTION MANUAL

PLEASE READ ALL INSTRUCTIONS AND SAFETY

PRECAUTIONS BEFORE OPERATING PRODUCT!

SAVE FOR FUTURE REFERENCE; WARRANTY

PERTINENT CONTENT.

Product Speci cations:

9000 ΙΙ

Model -

Voltage - 115v

Amperage - 16.08

Wattage - 1849.2

Hertz - 60

RPM - 3450

Horse Power - 1/3

Product Air Vol. - 260CFM

Product Air Vol. - 240CFM

9711 Mason Avenue, Chatsworth, CA 91311

(818) 772-2887 • (800) 821-9449 • fax: (818) 886-0218

www.DoubleKIndustries.com • [email protected]

Voltage - 230v

Amperage - 16.08

Wattage - 3698.4

Hertz - 50

RPM - 2850

Horse Power - 1/3

8/20/14