Electralog CS4416 Benutzerhandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Herd Electralog CS4416 herunter. Electralog CS4416 13 Seiten. Compact stoves
Auch für Electralog CS4416: Praktisches Benutzerhandbuch (10 seiten)

Seite drucken
Maintenance
light Bulb Requirements
Quantity of two (2) clear
chandelier or candelabra bulbs
with an E-12 (small) socket base,
and 25 Watt rating.
To Replace the light Bulbs
①
Remove the five (5) screws
from the access panel, located on
the back of the unit, and remove
access panel (Figure 3).
Figure 3
Access Panel
②
locate and examine the bulbs
to determine if replacement is
required.
③
Unscrew the bulb(s) counter
clockwise.
④
Insert and install new bulbs.
⑤
Secure access panel to unit.
10
bulbs (2)
Screws
(5)
Clear Door Panel Cleaning
The clear door is cleaned in
the factory during the assembly
operation. During shipment,
installation, handling, etc., the
clear door may collect dust
particles. These can be removed
by dusting lightly with a clean, dry
cloth.
To remove fingerprints or other
marks, the clear doors can be
cleaned with a damp cloth. The
clear door should be completely
dried with a lint free cloth to
prevent water spots.
To prevent scratching, do not use
abrasive cleaners or spray liquids
on the clear door surface.
Compact Stove Surface
Cleaning
Use warm water only to clean
painted surfaces of the Compact
Stove. Do not use abrasive
cleaners.
Servicing
Except for light bulb replacement
and cleaning described above, an
authorized service representative
should perform any other
servicing.