Doug Fleenor Design DMX24DIM Installations- und Betriebshandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Installations- und Betriebshandbuch für Dimmer Doug Fleenor Design DMX24DIM herunter. Doug Fleenor Design DMX24DIM 6 Seiten.
Auch für Doug Fleenor Design DMX24DIM: Installations- und Betriebshandbuch (5 seiten)

Seite drucken

Product description

The DMX24DIM is a 24 channel, 100 Watt per channel dimmer pack. It is fed by a

single 120VAC 15A branch circuit. Each of the dimmers can be separately controlled

using a DMX512-based lighting controller. The DMX24DIM is housed in an enclosure

suitable portable use or for mounting in a standard 19" rack. The DMX24DIM occupies

1U of rack space.

Safety warnings

•

There are no user serviceable parts in the DMX24DIM. Servicing should be

referred to qualified service personnel.

•

Do not connect or disconnect loads to the DMX24DIM with the power on.

Environmental

Operating temperature: 0-40º C

Operating humidity: 10-90% non-condensing

Indoor use only

Electrical ratings

Input: 120VAC, 60Hz, 15A

Output: 24 outputs, 120VAC, 100W each, 1800W maximum total

Certification

ETL Listed to the UL508 standard

Mounting/installation

The DMX24DIM can be used as a portable unit or it can be mounted in a standard 19"

equipment rack. Care must be taken to allow for unobstructed airflow around the unit.

There must be at least 6 inches of clearance in front of the DMX24DIM and two inches

of clearance on the left side of the enclosure (as viewed from the front panel). No blank

spaces are required above or below the DMX24DIM when it is rack mounted.

Page 2 of 6