Doug Fleenor Design Preset12 Benutzerhandbuch - Seite 8
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Kontrolleinheit Doug Fleenor Design Preset12 herunter. Doug Fleenor Design Preset12 11 Seiten.
Seite drucken
To Set Main/Remote
Enter set up mode.
Press and release button 6. LEDs will stop chasing.
Press and release the button for one of the following states:
1) Stand-alone. This is the only Preset12 on this DMX512 link.
2) Main. This is a Main station and will send poll messages to remotes.
3) Remote. This is a Remote station and will stay silent until polled.
LEDs will begin chasing.
To Set Loss of DMX512 Action
Enter set up mode.
Press and release button 12. LEDs will stop chasing.
Press and release the button for one of the following states:
1) Upon loss of external DMX512, hold last look.
2) Upon loss of external DMX512, fade to last look generated by Preset 12.
LEDs will begin chasing.
To Set a Button as an All-Off button
Enter set up mode.
Press and release button 1. LEDs will stop chasing.
Press and release button 12.
Press and release the button to be an all-off preset.
LEDs will begin chasing.
To Remove a Button's All-Off function
Assign the preset to a canceling group.
OPERATION
Buttons
There are twelve preset buttons. The buttons are non-tactile (no discernable 'click') switches
with about a hundredth of an inch of travel; they are not touch sensitive. They must be pushed,
not just touched. Each button has four functions.
Quick Press
Upon initial press, the current look is saved for future use. The preset is toggled (if on, it is
turned off, if off, it is turned on full) and other buttons in its group (if any) are turned off. The new
look is calculated, and a timed fade is initiated from the saved (current) look to the new look. The
yellow 'fade-in-progress' LED is illuminated.
Long Press
A long press (one second) completes the fade in progress, if any. This is useful if a long fade
time has been programmed but the user wants the change NOW. The yellow 'fade-in-progress'
LED is extinguished.
Page 8 of 11