Baumer O200 Gebrauchsanweisung - Seite 24
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Zubehör Baumer O200 herunter. Baumer O200 34 Seiten. Sensors with io-link
Seite drucken
Indication LEDs
4.6.2
While the underlying functionality of the LEDs is in general well defined, it is possible to deactivate or to
invert those.
Figure 23 LED Indication - Standard-behavior in operating mode
Parameter name
LED Settings.Green Mode
LED Settings.Yellow Mode
If the LED mode is set
-
On, the behaviour of the related LED is as described in Figure 23.
-
Off, the LED is deactived except if the function Find Me is activated. (See section 3.2.2)
-
Inverted, the LED behaviour is inverted to the definition in Figure 23.
en_BA_O200_IO-Link_V1.docx
15.08.2018/
Short Description
Power on/short circuit
Connected to output 1
-
State
-
Signal close to threshold/weak signal
The weak signal can be configured by using
the quality bit (section4.7)
Default:
LED on if output is active
24/34
Rights
Unit / Allowed
values
On
rw
Off
rw
On
Off
Inverted
Baumer Electric AG
Frauenfeld, Switzerland