Baumer R600V.DAH5-11205779 Handbuch - Seite 3

Blättern Sie online oder laden Sie pdf Handbuch für Zubehör Baumer R600V.DAH5-11205779 herunter. Baumer R600V.DAH5-11205779 4 Seiten. Radar distance measuring sensor

Seite drucken

NOTES:

1. ELECTRICAL SPECIFICATION:

a. VOLTAGE SUPPLY RANGE: 9V...32V (12VDC/24VDC VEHICLE POWER)

b. CURRENT CONSUMPTION: <160mA (averaged)

c. RADAR FREQUENCY: 122GHz...123GHz

2. OUTPUT FUNCTION:

a. CAN SAE J1939

b. BAUD RATE: 250kbaud

c. OUTPUT CIRCUIT: CAN 5V without internal 120 terminator

d. CAN UPDATE RATE: 1 ... 100 Hz

e. SENSING RANGE: 300mm...8500mm (center axis)

BLIND RANGE: 300mm (object detection limited)

3. MECHANICAL DATA:

a. RECTANGULAR HOUSING: 97 x 84 x 42.5mm (without connector)

b. DIAMETER MOUNTING HOLES:6.8mm±0.2mm

c. RECOMMENDED SCREWS: M6 ACC. MBM 10105

d. INSTALLATION TORQUE: Screw with property class 10.9: max torque of screw

12Nm...15Nm, Screw with property class 8.8: max torque of screw 10Nm ...12Nm

e. ENCLOSURE MATERIAL: POLYAMID (GLASS FIBER REINFORCED)

MOUNTING PLATE: ALUMINUM (COATED WITH CATAPHORETIC PAINTING (KTL))

g. LENS MATERIAL: Polyetherimid (PEI)

4. AMBIENT CONDITIONS:

a. STORAGE TEMPERATURE: -40°C...+85°C

b. OPERATING TEMPERATURE: -40°C...+60°C

5. SENSOR MEETS FOLLOWING REQUIREMENTS OF EMC AND ENVIRONMENT ACC. FSP:

a. EMC AGRICULTURAL MACHINERY EN ISO 14982 (12V/24V-SYSTEM)

b. EMC CONSTRUCTION MACHINERY EN 13309 (12V/24V-SYSTEM)

c. EMC EARTH MOVING MACHINERY ISO 13766 (12V/24V-SYSTEM)

d. EUROPE: RADIO EQUIPMENT AND REPEALING DIRECTIVE (RED) 2014/53/EU

e. USA / CDN: COMPLIANCE STATEMENTS SEE PAGE 2, CHAPTER 11 OF THIS

DRAWING

EMC (Industrial) ACC. TO EN 61000-6-2 / EN 61000-6-3

g. PROTECTION CLASS ISO 20653: IP69K

h. PARTICLE IMPACT EN ISO 20567-1 (GRAVEL ACC. TO EN11124 -2)

RANDOM VIBRATION IEC 60068-2-64 (5Hz...2000Hz, 11.55 Grms)

OPERATING MECHANICAL SHOCK IEC 60068-2-27 (50g)

6. PART IS MARKED WITH BAUMER LOGO; BAUMER PART NUMBER; BAUMER DATE CODE

7. MOUNTING RECOMMENDATION:

a. REQUIRED FLATNESS OF THE SENSOR MOUNTING SURFACE 0.2mm/100mm

b. DIRECT MOUNTING ONTO A STEEL PLATE WITH A THICKNESS OF 6mm WITH TWO

M6 SCREWS

c. INDIRECT MOUNTING ONTO A STEEL PLATE WITH A THICKNESS OF 3mm WITH

TWO M6 SCREWS AND TWO FLANGE NUTS

8. LED FUNCTIONS (LED INSIDE LENS)

a. SENSOR FULLY OPERATIONAL: GREEN LED blinking

b. NO OBJECT DETECTED: GREEN / YELLOW blinking

c. CAN BUS WAITING ON MASTER OR ERRORS: MAGENTA LED blinking

d. HW FAULT: RED LED blinking

9. Intended use / application policy:

a. The suitability and functionality of a Baumer product and its performance under different

applications and / or end-use cases can only be verified by testing, and shall ultimately be

the responsibility of the customer.

b. The product shall not be used:

- For functional safety applications and in potentially explosive atmospheres.

- In the direct control and modification of the state of function of the machine.

c. Possible malfunctions and failed measurements of the sensor must be intercepted at the

system level and shall not lead to unsafe situations in the system.

d. The customer shall perform its own safety assessment to account for sensor behavior in

particular situations (e.g. distance fluctuations in static situations, operator caused distance

manipulation by hand or other objects).

e. Safety relevant information must be communicated to the end-user.

10. Recommended free space around radar lens

Rotational cone with an angle of ± 30° around sensor center axis

Sensitivity and detection of objects near the blind region can be influenced by disturbing objects

(e.g. metal boom structures or water hose) within this free space. Moving objects up to 60° outside

of free space should be avoided. Further testing is recommended to define a smaller free space.

3/4

]HUR GLVWDQFH

0DWLQJ &RQQHFWRU

$036($/

3,1

p /HQV

FHQWHU D[LV

Qty

Item

Rev

Drawn

Mod

59'$+

'LVWDQFH PHDVXULQJ VHQVRU

&$1 +,

*1'

&$1 /2

Pos.

Material

Approved

Rev

Drawn

Approved

UPD

deburred

UPD

Mod

Baumer Electric AG

Postfach · Hummelstrasse 17 · CH-8501 Frauenfeld

Phone +41 (0)52 728 11 22 · Fax +41 (0)52 728 11 44

/DVHU PDUNHG

Remarks

2II +LJKZD\

Project

5DGDU

Replaced by

Replacement for

Scale

Drawn

UPD

Checked

ZHPL

Approved