Electric Eel Z5-AF Benutzerhandbuch - Seite 6
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Ultraschall-Schmuckreiniger Electric Eel Z5-AF herunter. Electric Eel Z5-AF 9 Seiten. Drain cleaning machine
Auch für Electric Eel Z5-AF: Kundenhandbuch Sicherheit und Betrieb (2 seiten)
Seite drucken
10. To maintain safe and efficient
operation, thoroughly clean all
cables with water after use.
Acids in the drain and sewer
lines attack and deteriorate the
metal of the cables and tools.
Deterioration will cause
weakness in cable and tools and
result in fracture or breakage.
11. Replace all cables and tools that
become deteriorated, worn,
kinked, bent, or any other
damage that occurs.
MACHINE SET-UP
DANGER
TO PREVENT SERIOUS BODILY
INJURY:
THIS MACHINE IS EQUIPPED
WITH A CAGE/DRUM/DISC
CLUTCH. THE MAXIMUM TORQUE
OF THE CLUTCH SETTING MUST
NEVER EXCEED 35 INCH/LBS.
NEVER USE ANY CABLE IN THIS
MACHINE OTHER THAN ELECTRIC
EEL GALVANIZED AIRCRAFT WIRE
REINFORCED MUSIC WIRE CABLE
IN 1/2" DIAMETER.
DISCONNECT POWER CORD
BEFORE ANY SET UP OR
MAINTENANCE IS ATTEMPTED.
This machine comes completely
assembled except for cable.
CAGE/DRUM REMOVAL
1. Disconnect power cord before
any set up or maintenance is
attempted.
2. Remove auto cable feeder from
mount by removing two (2)
5/16" bolts on the underside of
the mount.
3. Remove pulley guard by
unscrewing the thumb screw/
knob on the top of the pulley
guard.
4. Push down on motor to
compress spring. This will allow
the belt to be removed.
5. Pull spring loaded pin on rear of
cable axle.
6. Slide cage/drum unit with clutch
assembly forward.
7. Use reverse procedure for
reinstalling cable assembly.
8. Reinstall pulley guard.
9. Reinstall feeder on mount.
CABLE INSTALLATION
1. Disconnect power cord before
any set up or maintenance is
attempted.
2. Completely uncoil cable to be
installed. This will help avoid
unnecessary kinking.
3. Insert approximately 12" of
cable through the feeder and the
guide tube into the cage/drum.
The cable should coil in the
6