Baumer AMG11 N13 Handbuch - Seite 19

Blättern Sie online oder laden Sie pdf Handbuch für Medienkonverter Baumer AMG11 N13 herunter. Baumer AMG11 N13 41 Seiten. Absolute encoders with profinet interface

Seite drucken
Baumer AMG11 N13 Handbuch

4.5. Topology planning

It is obligatory to plan the topology in order to perform IRT Class3 and / or to utilize the system feature
"Device replacement without exchangeable medium". Port connections and cable lengths between all system
components are made known to the project. In this way the project tool is enabled to consider cable-, port-
and switch delay times and to optimize overall performance.
Enter Topology Planning e.g. by right-clicking the PROFINET bus rail in the Hardware window of Step7
software, which opens the following pull-down menu.
The Graphic View clearly shows port assignment of all bus components. The assignment made here must fit
to the real conditions.
In the example below, controller port1 is linked to port 1 of the encoder. The programming tool (PG/PC) is
connected to port 2 of the controller.
Baumer_BUDE-PROFINET_MA_EN.docx
19/41
www.baumer.com
14.06.2016 / bja