Baumer HOG 10 Montage- und Betriebsanleitung - Seite 5
Blättern Sie online oder laden Sie pdf Montage- und Betriebsanleitung für Medienkonverter Baumer HOG 10 herunter. Baumer HOG 10 28 Seiten. Incremental encoder with connecting cable ölfle
Auch für Baumer HOG 10: Installations- und Betriebsanleitung (40 seiten), Montage- und Betriebsanleitung (36 seiten)
Seite drucken
1
General notes
1.1
Symbol guide:
Danger
Warnings of possible danger
General information for attention
Informations to ensure correct device operation
i
Information
Recommendation for device handling
1.2
The incremental encoder HOG 10 is an opto electro nic precision measurement device
which must be handled with care by skilled personnel only.
1.3
The expected service life of the device depends on the ball bearings, which are equipped with
a permanent lubrication.
1.4
The storage temperature range of the device is between -15 °C and +70 °C.
1.5
The operating temperature range of the device is between -40 °C and +90 °C
(UL: -40...+80 °C, >3072 pulses per revolution: -25...+90 °C), restricted in potentially
explosive environments, see section 2, measured at the housing.
1.6
EU Declaration of Conformity meeting to the European Directives.
1.7
The device is UL approved (not applicable for operation in potentially explosive atmospheres).
1.8
We grant a 2-year warranty in accordance with the regulations of the ZVEI (Central Association
of the German Electrical Industry).
1.9
Maintenance work is not necessary. The device may be only opened as described in this
instruction. Repair work that requires opening the device completely must be carried out by the
manufacturer. Alterations of the device are not permitted.
1.10
In the event of queries or subsequent deliveries, the data on the device type label must be
quoted, especially the type designation and the serial number.
1.11
Disposal (environmental protection):
Do not dispose of electrical and electronic equipment in household waste. The product
contains valuable raw materials for recycling. Whenever possible, waste electrical and
electronic equipment should be disposed locally at the authorized collection point. If
necessary, Baumer gives customers the opportunity to dispose of Baumer products profession-
ally. For further information see www.baumer.com.
i
Warning!
Damaging the seal
MB124aT1 - 11065823
Baumer_HOG10-NIRO-A_DE_EN_202209_MI_11065823 (22A2)
on the device invalidates warranty.
1
General notes
2