Baumer HUBNER BERLIN POG 10 ETL Montage- und Betriebsanleitung - Seite 9
Blättern Sie online oder laden Sie pdf Montage- und Betriebsanleitung für Medienkonverter Baumer HUBNER BERLIN POG 10 ETL herunter. Baumer HUBNER BERLIN POG 10 ETL 28 Seiten. Incremental encoder
Seite drucken3
Security indications
3.1
Risk of injury due to rotating shafts
Hair and clothes may become tangled in rotating shafts.
• Before all work switch off all voltage supplies and ensure machinery is stationary.
3.2
Risk of destruction due to electrostatic charge
Electronic parts contained in the device are sensitive to high voltages.
• Do not touch plug contacts or electronic components.
• Protect output terminals against external voltages.
• Do not exceed maximum voltage supply.
3.3
Risk of destruction due to mechanical overload
Rigid mounting may give rise to constraining forces.
• Never restrict the freedom of movement of the device.
The mounting instructions must be followed.
• It is essential that the specified clearances and/or angles are observed.
3.4
Risk of destruction due to mechanical shock
Violent shocks, e. g. due to hammer impacts, can lead to the destruction of the device.
• Never use force.
Mounting is simple when correct procedure is followed.
• Use suitable puller for dismounting.
3.5
Risk of destruction due to contamination
Dirt penetrating inside the device can cause short circuits and damage the sensing system.
• Absolute cleanliness must be maintained when carrying out any work on the device.
• Never allow lubricants to penetrate the device
3.6
Risk of destruction due to adhesive fluids
Adhesive fluids can damage the device Dismounting a device secured to a shaft by adhesive
may lead to the destruction of the device.
3.7
Explosion risk (only with option ATEX)
You can use the device in areas with explosive atmospheres of category 3 D and 3 G. The ope-
ration in other explosive atmospheres is not permissible.
MB069b - 11117426
BAUMER_POG10-ET_DE_EN_202212_MI_11117426 (22A3)
Security indications
6