Baumer HUBNER BERLIN PROFI NET microGen HMG10P Betriebshandbuch - Seite 25
Blättern Sie online oder laden Sie pdf Betriebshandbuch für Medienkonverter Baumer HUBNER BERLIN PROFI NET microGen HMG10P herunter. Baumer HUBNER BERLIN PROFI NET microGen HMG10P 44 Seiten. Incremental encoder with magnetic sensing
Auch für Baumer HUBNER BERLIN PROFI NET microGen HMG10P: Montage- und Betriebsanleitung (32 seiten), Montage- und Betriebsanleitung (40 seiten)
Seite drucken
Baumer Hübner
6
Electrical installation
DANGER
Injury by to secondary damage
Encoder failure or incorrect signals may entail system control errors.
a) Eliminate secondary encoder damage by the relevant safety precautions in the downstream
electronics.
NOTICE
Sensor damage due to faulty power supply.
The sensor can be damaged due to faulty power supply.
a) Operate the sensor only with protected low voltage and safe electrical isolation of protection
class III.
NOTICE
Sensor damage or unintended operation due to work on live parts.
Work on live parts may lead to unintentional operation.
a) Disconnect the power before carrying out any cable.
b) Disconnect the power before connecting or disconnecting electrical connections.
NOTICE
Sensor damage by excessive switching voltage.
The sensor's overload limit is for protection only and not intended as limit for the permanently
switching voltage.
a) Make sure that the maximum permitted switching voltage is not exceeded.
6.1
EtherNet/IP
6.1.1
Features EtherNet/IP
INFO
Detailed instructions for the EtherNet/IP interface as well as the XML file can be found on the
Baumer website www.baumer.com.
Fieldbus protocol
Device profile
Features
Process data
V1, T1 | HMG10 & HMG10P EtherNet/IP
EtherNet/IP
Encoder Device, Type 22hex, according to CIP
specification
100 MBaud Fast Ethernet
Programmable IP address
Automatic IP address assignment (DHCP)
Direction of rotation, resolution, total resolution
and preset programmable according to CIP
specification
Position value, warning flag, alarm flag Assem-
bly Instances 1 and 2 according to CIP specifi-
cation
Operating Manual
Electrical installation
|
6
25