Baumer Hubner HMC16 Series Montage- und Betriebsanleitung - Seite 5
Blättern Sie online oder laden Sie pdf Montage- und Betriebsanleitung für Medienkonverter Baumer Hubner HMC16 Series herunter. Baumer Hubner HMC16 Series 44 Seiten. Encoder without bearings - incremental
Seite drucken
1.
IMPORTENT NOTES
1.1
Symbol guide
Warning
Disregarding could result in serious injury, death or damage to property
)
Attention
Disregarding could result in damage to property or damage/malfunction of the device
i
Information
Additional information and recommendations
1.2
Intended use
The bearingless encoder HMC16 is a precision measurement device for the acquisition
of speed/position information for the control of drive units and the provision of electronic
output signals for downstream devices�
The device must not be used for any other purpose� The function of the device is descri-
bed in this mounting instruction� The customer must check the suitability for the purpose
intended�
Mounting and selection must be executed by authorized and qualified personnel. Moun-
ting, electrical commissioning or any other work with the device or system is to be perfor-
med by appropriately qualified staff only.
Do not put the device into service if there is any visible evidence of damage�
Do not operate the device beyond the limit values stated in this mounting instruction�
Any risk of personal injury, damage of the system or company equipment due to failure or
malfunction of the device must be eliminated by corresponding safety measures�
Warning
Disregarding intended use could result in serious injury or damage to property�
1.3
Exclusion from liability
The manufacturer is not liable for any damage to persons or property resulting from unin-
tended use of the device�
MB168T1EN - 11184527, 19A2, Baumer_HMC16-T1_II_EN
IMPORTENT NOTES
1/40