Douglas Dynamics WESTERN ENFORCER 97540 Installationsanleitung Handbuch - Seite 5

Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Schneefräse Douglas Dynamics WESTERN ENFORCER 97540 herunter. Douglas Dynamics WESTERN ENFORCER 97540 19 Seiten. Ultramount 2 snowplow

Seite drucken

PRELIMINARY STEPS

1. Set aside the blade guides and parts bags. The

vehicle electrical harnesses are in the headlamp

box.

2. Remove the lag bolts and wood blocks securing

the headlamp channel to the lift frame and set the

headlamp channel aside.

3. Remove the fasteners and blocking securing the

T‑frame to the pallet.

4. Remove the shipping bracket connecting the lift

arm to the T‑frame. Discard the shipping bracket

and its fasteners.

5. While supporting the lift frame, remove the

self‑tapping screw from each shipping bracket.

Remove and retain the clevis pins and discard the

shipping brackets.

6. Remove the mount receivers from the lift frame.

Position the receivers in the mount brackets on

each side of the vehicle. Align the notches in the

rear of the receivers with the pins on the brackets.

Rotate the receivers up and secure with a

3/4" x 4‑3/8" clevis pin, spacer, and hairpin cotter

as shown on each side.

Hairpin

Cotter

Spacer

Lit. No. 74914, Rev. 01

INSTALLATION INSTRUCTIONS

Vehicle

Mount

3/4" x 4-3/8"

Clevis Pin

Receiver

June 1, 2020