Baumer PAC50S Betriebshandbuch - Seite 22

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Messgeräte Baumer PAC50S herunter. Baumer PAC50S 44 Seiten.

Seite drucken
Baumer PAC50S Betriebshandbuch
9
|
Commissioning
h) Confirm your selection by clicking on Set.
Result:
ü
The display orientation is changed. Display returns to main screen and is rotated by 180°.
Also see about this
2 Display menu navigation [} 28]
9.4

Parameterization via FlexProgram

Condition:
ð Cable and PC with FlexProgram and FlexProgrammer 9701
Instruction:
a) Connect FlexProgrammer 9701 to sensor using the 5-pin M12 connector.
b) Connect FlexProgrammer 9701 to a PC.
The PC must have the latest version of FlexProgrammer installed.
c) Proceed with sensor parameterization:
Sensor parameterization options (example):
Parameterization of switching output.
n
Parameterization of temperature compensation.
n
Select the temperature source for compensation.
n
Define the conductivity range.
n
Defining the current limits.
n
Proceed with data collection.
n
Sensor and media calibration.
n
Define the measuring mode.
n
Define output damping.
n
22
Orientation
Normal
Rotated
Orientation
Normal
Rotated
Operating Manual
Baumer
PAC50H/S | V1