Douglas Lighting Controls Dialog WIR-3110 Benutzerhandbuch - Seite 4
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Beleuchtungsanlagen Douglas Lighting Controls Dialog WIR-3110 herunter. Douglas Lighting Controls Dialog WIR-3110 11 Seiten. Ir setting unit
Seite drucken
Description & Function
1. Device Name
The device that you are programming. Available devices are:
1-4 Button Switch, 8 Button Switch, Dimmer Switch, 8-Contact
Input, Key Switch, PIR Occupancy Sensor and Photo Sensor.
2. Delay ON Time
Number of seconds an ON command is delayed after being
activated. Minimum 0 Seconds - Maximum 40 minutes.
*When 'Occupancy PIR' is the device selected, this field will
indicate the level of sensitivity to apply (from 0-10)*.
3. Delay OFF Time
Number of seconds an OFF command is delayed after being
activated. Minimum 0 Seconds - Maximum 40 minutes.
4. Occupancy
Indicates whether occupancy sensor connected will use
default manufacturer settings for time delay (NO) or time
delay as set by the IR Setting Unit (YES) *for 8-Contact Input
Unit only*.
5. Action
The action to be performed by the IR Setting Unit. READ
(Reads current settings from a particular device), WRITE
(Writes the current settings on the LCD screen to a particular
device), CLEAR (Clears all settings associated with a device),
OFF (Turns the IR Setting Unit Off).
PAGE 4
Liquid Crystal Display Panel (LCD)
6. Function of Selected Device
Sets a switch's function. Options are: ON only, OFF only,
Toggle (ON and OFF), Dim Up, Dim Down. Sets the Contact
Input Units function to correspond to the Contact-type that is
connected to its terminals.
7. Channel Number
Output channel to be programmed.
8. Address
Sets the Address for the device being programmed.
9. Input Type
Input to target: Individual, Group, Local Preset, Global Preset,
Indiviual Dim, Group Dim.
10. Input Component Number
The input component of a device being programmed
(multiple button switch or 8-Contact Input Unit).
11. Cursor
Indicates a selected item.
universaldouglas.com