Asus Integrated RAID Installations- und Schnellstarthandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Installations- und Schnellstarthandbuch für Server Asus Integrated RAID herunter. Asus Integrated RAID 29 Seiten. Quick start guide

Seite drucken

Getting Help

Console Plus (StorCon+), to facilitate the configuration of the RAID subsystem. Finally,

the guide provides details of all product features supported by the software and firmware

For further information refer to the Optional Features section of the appropriate hardware

guide since not all features are applicable to all IIR controllers.

The Hardware Guide and the Software Guide are provided on the CD-ROM in an online/

HTML format (at <cdromdrive>:\docs\index.htm) viewable with any HTML-compatible

browser, such as Microsoft Internet Explorer* or Netscape Navigator*. The Quick Start

Guide, Hardware Guide and the Software Guide can also be displayed and printed using

Adobe Acrobat Reader* (not provided on the CD-ROM).

1.2

Getting Help

Consult the accompanying Hardware Guide for your IIR controller for customer support

information.

1.3

Regulatory Information

Refer to your product's Hardware Guide for certification and regulatory information.

1.4

Warnings and Cautions

This guide and all associated guides in the user documentation set (the Quick Start Guide,

the Hardware Guide, and the Software Guide) should be used by qualified technical

personnel with experience installing and configuring PCI adapter cards.

Read and adhere to all warnings, cautions, and notices in this guide and all the guides in

the user documentation set supplied with this product.

Warnings

•

The connection of a non-shielded equipment interface cable to this equipment will

invalidate the FCC certification of this device and may cause interference levels that

exceed the limits established by the FCC for this equipment. It is the responsibility of

the user to obtain and use a shielded equipment interface cable with this device. If the

equipment has more than one interface connector, do not leave cables connected to

unused interfaces unless otherwise instructed to do so in the user manual.

•

Changes or modifications not expressly approved by the manufacturer could void the

user's authority to operate the equipment.

Cautions

•

Take precautions to prevent electrostatic discharge (ESD) damage before handling the

IIR controller.

•

ESD can damage adapter card components. Perform the described procedures in this

guide only at an ESD workstation. If no such station is available, you can provide some

Installation Quick Start Guide