Comat SMS Relay Betriebsanleitung - Seite 14

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Fernsteuerung Comat SMS Relay herunter. Comat SMS Relay 17 Seiten. Message system

Comat SMS Relay

Input configuration

6.6.3 Delayed switching on

If there is an input signal, the respective message can be time delayed, i.e. the SMS relay

only sends the pre-defined message after expiry of the preset time, if the signal is still there.

In other words the input signal is ignored during this time. Time delays of 0.1 seconds to 99.9

hours are possible. This time function must be activated.

If an input changes from HIGH to LOW, i.e. there is no longer an input signal, a delayed

switching off can also be activated here. The SMS relay sends the predefined message after

the preset time, unless the signal is no longer present. Time delays of 0.1 seconds to 99.9

hours are possible. This time function must be activated.

Operating instructions SMS Relay

ba_smsrelay_0706e.doc