Amphenol RESMLAC 28 MG Installationshandbuch - Seite 4
Blättern Sie online oder laden Sie pdf Installationshandbuch für Schalter Amphenol RESMLAC 28 MG herunter. Amphenol RESMLAC 28 MG 15 Seiten. Ip67 rugged ethernet managed switch
Auch für Amphenol RESMLAC 28 MG: Installationshandbuch (15 seiten)
Seite drucken
Section 2
Overview
Front Panel
Display
LED Indicators
for Power
LED indicators
for Ethernet
ports
ON/OFF
switch
RESMLAC 28MG IG rev. 1.3
Amphenol
– 948, Promenade de l'Arve – B.P. 29 – 74311 THYEZ Cedex – France - +33(0)4.50.89.28.00 – www.rjswitch.com
Hardware
The switches can be mounted directly to a flat surface or to a wall. Refer to the mechanical
drawing below. Its high protected enclosure makes it able to withstand immersion (IP67
rating).
The Ethernet connections come out from rugged MIL-DTL-38999 serie III connectors for
power and fiber and with SCE Terrapin connectors for Ethernet.
The following describes the front panel, and LED indicators of the RESMLAC28MG.
The Single Power 1 and Power 2 Led indicators on the front panel provide the operative
status of the switch. Some models come with only 1 power supply, some come with 2
separate power supplies.
On models with only 1 power supply, only Power 1 LED indicator will be operational.
Once the LED is turned on, the switch is powered and ready-for-use.
This LED will be ON solid green when proper power has been applied to the unit.
Each port has 2 LEDs indicators:
•
Link / Activity (Off – there is no link, Steady Green – There is a device connected,
Flashing Green – there is data transmission)
•
Speed (Steady Green for 1000Mbps, Off for 100 and 10 Mbps)
RESMLAC28MG is equipped with an ON/OFF switch, located at the rear of
The
the unit. The ON/OFF switch has a lock apparel. To move from one position to the
other, pull and move the ON/OFF switch.
Page 4 of 15
Last Rev: 1-Feb-21