Amphenol RJS-BKN-MG7F3G-704 Benutzerhandbuch - Seite 6
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Netzwerk-Router Amphenol RJS-BKN-MG7F3G-704 herunter. Amphenol RJS-BKN-MG7F3G-704 15 Seiten. Ip65/68 sealed managed rugged ethernet switch
Seite druckenSection 3
Overview
Plugs and
backshells
Plugs
Suggested Backshells
Heat shrinks
Crimping
tools
(*): Note: metallic tools are also available. Consult dedicated Tri-Start TV-CTV catalog (E113) for details.
Managed Switch Hardware Manual
Amphenol
– 948, Promenade de l'Arve – BP 29 – 74311 THYEZ Cedex – France - +33(0)4.50.89.28.00 www.rjswitch.com
Power Wiring
The Managed Switches can be powered from the same DC source that is used to power your I/O
devices. The continuous voltage needs to be applied between the P1 and/or P2 terminal and the
Minus terminal (shown hereunder). The terminal GND should be tied to panel or chassis ground.
To reduce down time resulting from power loss, the Managed Switch can be powered redundantly.
2 contacts for power are available on the switch (P1 and P2). You may use only one or both up to
your need.
Refer to the DC Power diagram hereafter for wiring details.
Note: the P2 terminal is not available with -704 or PSM option.
The switches should be powered using mating plugs and backshells compliant with MIL-
DTL-38999 series III. We suggest using hereunder accessories. Another backshell can be
used but it must ensure a correct sealing protection.
Accessories part numbers
RJS-ML-MG7F3G (-options)
TV 06 RW 0935 S
(Size 9; using 6 contacts #22D)
TVNSA 09 014
The plugs are using crimp contacts.
We suggest using hereunder tooling.
Crimping tools for all models
Crimping tool
Positioner
Contact insertion
and removal tool
(plastic) (*)
804221
Amphenol No
809 801
809 835
809 856
Page 6 of 14
RJS-BKN- MG7F3G (-options)
TV S06 RF 0935 S
(Size 9; using 6 contacts #22D)
TVNSA 09 023
804221
Military No
M22520/2-01
M22520/2-07
M81969/14-01
Last Revised: 25-Jun-13