Amphenol Socapex RJSMLAC 8UG CAPS Hardware-Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Hardware-Benutzerhandbuch für Netzwerk-Router Amphenol Socapex RJSMLAC 8UG CAPS herunter. Amphenol Socapex RJSMLAC 8UG CAPS 13 Seiten. Ip68 rugged unmanaged ethernet switch, amphenol rj-switch

Seite drucken

Section 3

Selecting a

Site

CAPS for

unused

connectors

Mounting

RJSMLAC 8UG CAPS UM rev. 1

Amphenol

– 948, Promenade de l'Arve – B.P. 29 – 74311 THYEZ Cedex – France - +33(0)4.50.89.28.00 –

www.rjswitch.com

Installation

As with any electronic device, you should place the switch where it will not be subject to

extreme temperatures, humidity, or electromagnetic interference that exceeds the

RJSMLAC-8UG-CAPS

following requirements:

•

The ambient temperature should be between -35 to 75 degrees Celsius.

•

The relative humidity is recommended to be less than 95% percent, non-

condensing.

•

Surrounding electrical devices should not exceed the electromagnetic field (RFC)

standards for MIL-STD-461E.

The switches are pre-equipped with caps on all ports, including power and Ethernet.

Make sure all connectors are protected with cap or sealed plug to ensure sealing

and prevent from deterioration of the contacts.

The RJSMLAC-8UG-CAPS Ethernet Switch can be fastened to any flat surface by

mounting the box directly. Refer to the mechanical drawings below. Make sure to allow

enough room to route your Ethernet and power cables.

The RJSMLAC-8UG-CAPS weights 1.5 Kg and is mounted via its four 4x4.5 mm holes for

screws.

The external dimensions of the RJSMLAC-8UG-CAPS are given here after.

's profile. Specifically, the site you select should meet the

Page 5 of 13

Last Rev: 27-Jun-13