Dover HYDRO EvoWash Schnellstart-Handbuch - Seite 3

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Spender Dover HYDRO EvoWash herunter. Dover HYDRO EvoWash 19 Seiten.

installation (continued)

Installation Diagram

NOTE: North America

Model Shown

side view

Rinse Feed Inlet Hose

Rinse Feed Outlet Hose

From Rinse product container

Wall Mounting the Enclosure

NOTE: Ensure the wall anchors are suitable for the wall being mounted to.

1) Position the enclosure against the wall at the chosen installation location and

mark the wall through the four mounting holes.

2) Drill four holes in the marked positions using an 8 mm (5/16 inch) drill bit.

3) Insert the four wall anchors into the drilled holes, pushing them flush to the wall.

4) Secure the product to the wall with the four screws and washers, using a PZ2 or

#2 Phillips screwdriver

Water Inlet

Power Wires (with fused isolation switch).

Detergent and (Optional) Rinse Signal Wires

Detergent Feed Hose

Conductivity Probe Wires

Dish Machine

NOTE: Global

Model Shown