1byone Nostalgic Wooden Turntable 471NA-0007 Gebrauchsanweisung - Seite 8
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Drehscheibe 1byone Nostalgic Wooden Turntable 471NA-0007 herunter. 1byone Nostalgic Wooden Turntable 471NA-0007 11 Seiten.
Seite drucken
2. Make sure the Volume control dial is in the correct position.
3. When removing or stopping playback of the cassette tape, fully press the Eject
/
button.
Skipping Tracks
When the cassette tape is playing, press the Eject
fast forward through the tape.
NOTE: To avoid damage to the cassette mechanism and your tape, always eject the
tape after each listening session.
CONNECTING HEADPHONES
Adjust the turntable volume to minimum before connecting headphones/
earphones to the headphone jack. Headphones/earphone should have a 3.5mm
diameter stereo plug and an impedance of 8-32 ohms. When headphones are
connected, sound from the turntable's internal speakers will automatically stop.
NOTE: Extended listening of music at high volume may damage hearing. It is highly
recommended to listen at comfortable volume levels.
RECORDING
This turntable can record music from a CD disc/Record/Cassette/Aux to a USB
memory/storage device.
1. Connect to power and press the
2. Insert a USB device into the USB port.
3. Press the Function button to select the desired mode you want to record.
• Recording from a CD: Place the CD disc into the CD compartment. Press the
button to start playing and press
be recorded.
• Recording from a vinyl record: Place the record on the turntable and move the
Tone Arm to the desired starting point over the record.
• Recording from a cassette: Place a cassette tape into the cassette slot. Press in the
Eject
/
button halfway down to fast forward through the tape.
• Recording from Aux In: Connect the external device to the AUX IN Jack. Start
playback of the device's music.
4. After the above media's playback has started, press the Record button to start
recording. "rEO" will show on the display.
5. To stop recording, press the Record button once.
6. To play the recorded file, press the Function button to select USB mode and
press the
button to start playback. Press the
previous/next tracks.
/
button halfway down to
button to turn on the turntable.
or +10 button to search for the track to
/
buttons to search
/
12
NOTES:
• Don't forget that you must return the Tone Arm to the Tone Arm Rest manually after
recording.
• Make sure the USB device has enough available memory for all the recordings.
• Bluetooth/AM Radio/FM Radio and Aux Out cannot be recorded.
MAINTENANCE AND CARE
• Always remove the power cable plug from the power outlet before cleaning the
turntable.
• Clean the turntable with a slightly damp cloth. Do not use any chemical or
abrasive cleaning agents.
• If you do not intend to use the turntable for a long period of time, store it in a
clean, dry place away from direct sunlight.
13