Dover TWG TULSA WINCH 1500W Service-Handbuch - Seite 5

Blättern Sie online oder laden Sie pdf Service-Handbuch für Winden Dover TWG TULSA WINCH 1500W herunter. Dover TWG TULSA WINCH 1500W 19 Seiten.

MAINTENANCE AND SERVICE

For safe and consistent operation of TULSA WINCH hoists, swing drives, and winches, a regular

program of preventive maintenance is strongly recommended. Regular oil changes with the

correct oil for the ambient temperature conditions and an annual inspection of the wear

components will help ensure a long life for your planetary geared products.

Maintenance Scheduling

The owner is to ensure proper inspection intervals, in compliance with the API RP 2D Section 4

requirements or the ANSI B30.5, 5-2.3, and will review hoist usage categories on a periodic

basis. A Qualified Inspector should perform all maintenance and inspections.

•

For hoists in occasional use, less than 10 hours per month, API RP 2D recommends a pre-

use inspection and an annual 12-month inspection based on average use over a quarter.

•

For hoists in moderate use, more than 10 but less than 50 hours per month, API RP 2D

recommends a pre-use inspection, quarterly inspection, and an annual 12-month inspection

based on average use over a quarter.

•

For hoists in heavy use, more than 50 hours per month, API RP 2D recommends a pre-use

inspection, monthly inspection, quarterly inspection, and an annual 12-month inspection.

Oil Level Maintenance

Tulsa Winch recommends that the oil level in the gearbox and brake housing be checked and

adjusted as part of the pre-use inspection. If the oil level drops frequently or oil leakage is

detected during an inspection, maintenance should be performed to correct any problems.

Oil Change Interval

The oil in the gearbox and brake sections should be changed every 1000 hrs or 6 months of

usage.