Amphony 1000 Häufig gestellte Fragen - Seite 3

Blättern Sie online oder laden Sie pdf Häufig gestellte Fragen für Kopfhörer Amphony 1000 herunter. Amphony 1000 4 Seiten. 2.4 ghz digital wireless headphones
Auch für Amphony 1000: Vergleich der Merkmale (1 seiten), Informationen zum Produkt (4 seiten), Benutzer- und Installationshandbuch (8 seiten)

Q: Can these headphones also be used to listen to surround sound ?

A: Yes. In order to experience surround sound via headphones, it is necessary to convert the

surround signal into something called a ‚binaural signal'. There are many binaural processors on the

market which can be connected directly to the transmitter. It is recommended though to test the

binaural processor prior to purchase since the surround perception very much depends on your

hearing and a particular binaural processor may not be suitable for you. You can test the processor

using corded headphones.

Q: Can more than one set of headphones be used at the same time ?

A: It is possible to purchase additional headphones individually which can be operated from the

same transmitter. Please contact your dealer for more information.

Q: Will my 2.4 GHz cordless telephone or wireless LAN affect the operation of the

headphones or vice versa ?

A: While the headphones will normally not affect the operation of a 2.4 GHz cordless telephone or

wireless LAN, the headphones may mute while the telephone or wireless LAN is being operated.

The range of the headphones may also be affected during the operation of other 2.4 GHz

equipment. If you do operate a 2.4 GHz cordless telephone or wireless network close to the

headphones, we recommend that you purchase one of our 5.8 GHz models to eliminate any

possibility of interference. Whether or not the headphones will be affected by other 2.4 GHz devices

depends to a large degree on the type of equipment and the distance between such equipment and

the headphones relative to the headphones transmitter. Digital cordless telephones are more likely

to cause problems than analog cordless telephones. The base station of certain types of cordless

telephones, such as the Siemens Gigaset or Panasonic Gigarange series, will periodically

broadcast signal beacons, even when the telephone is not in use, that may cause a clicking noise of

the headphones. Walls located between such equipment and the headphones will in many cases

attenuate an interfering signal enough for it not to cause any problems when operating the

headphones. The headphones employ an error correction scheme and thus can tolerate

interference up to a certain degree without any signal degradation. If interference is a problem and if

there is no direct line-of-sight to the headphones transmitter then the use of RangeBooster modules

is recommended.

Q: How does the transmitter connect to my audio equipment ?

A: The transmitter connects to any standard audio line output via the supplied stereo RCA audio

cable. In cases where no line output (RCA audio out) is available, the transmitter can also connect

to other audio outputs via appropriate adapters which are not supplied with the product. By using a

Y adapter which has either a 3.5 mm or a 6.3 mm audio plug on one side and 2 RCA plugs on the

other side, the transmitter can be connected to headphone outputs. Please note that most

headphone outputs can be adjusted in volume. It is imporant that any adjustable outputs be set

such to the level which yields the highest volume at the headphones without clipping (distortion).