AmpleNess S5285 Benutzerhandbuch - Seite 15
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Kamera-Zubehör AmpleNess S5285 herunter. AmpleNess S5285 20 Seiten. Storage lithium battery
Seite drucken5.10.5 Communication wire connection
A single battery: just select the corresponding interface according to the communication
protocol of inverter.
Multiple batteries: the host and the slave batteries communicate in cascade mode, one of
them is the host, and the rest are slave batteries. Then, the corresponding port can be connected
to the host battery according to the communication protocol of inverter.
5.10.6 Start-up
Please confirm again whether all cables are correctly connected, firmly connected, and not
short circuit or reverse connection before starting up.
Please turn all battery switch buttons to "ON" .
A single battery: If the battery SOC indicator is always on and the alarm indicator is off, it
means that the battery has been started.
Multiple batteries: If all battery SOC indicators are always on and the alarm indicator is off,
it means that all batteries have been started.
Attention: please connect the inverter immediately to charge if battery power is too low and
cannot be started.
5.10.7 Power-on test
Please connect battery and inverter or DC switching power supply.
Please check whether battery state is normal according to the indicator table:
battery will be in charging mode if battery power is not full and inverter has successfully
charged to battery.
battery will be in standby mode if battery power is full and is not supply power to loads.
battery will be in discharging mode if battery is supply power to loads.
System
Running
State
State
Shutdown
Dormancy
Standby
Normal
Normal
Over-current
warning
Charge
Over-voltage
warning
Temperature,
over-current
protection
Normal
Discharge
Warning
AMPLENESS Lithium Battery S5285 User Manual
RUN
ALM
●
●
OFF
OFF
OFF
Flash 1
OFF
OFF
ON
OFF
Flash 2
ON
Flash 1
OFF
OFF
Flash 1
Flash 1
OFF
Flash 3
OFF
Flash 3
Flash 3
13
SOC
●
●
●
OFF
OFF
OFF
OFF
Follow battery capacity
indication
Follow battery capacity
indication
OFF
OFF
OFF
OFF
Follow battery capacity
indication
Instruction
●
All OFF
OFF
Standby state
OFF
LED flash 2
maximum
LED flash 2
maximum
OFF
OFF
Follow battery ON
indication