Dowco Rally Pack 50030-00 Einbauanleitung
Blättern Sie online oder laden Sie pdf Einbauanleitung für Zubehör für Motorräder Dowco Rally Pack 50030-00 herunter. Dowco Rally Pack 50030-00 2 Seiten. Universal luggage system
Seite druckenWARNING
This system is recommended for use with a sissy bar/backrest and luggage rack combination which is permanently attached to
the motorcycle.
Do not exceed the manufactures recommended load capacity.
Consult your owner's manual for tire inflation pressuers and gross axle weight rating. Failure to follow recommended weight
loading capacities may affect handling. This could result in property damage, injury and possibly death.
1. PREPARATION
▶ Tools required: scissors
▶ Place motorcycle on a secure & level surface
2. INSTALLATION – Jumbo Backpack Installation
▶ Open horizonal hook & loop straps on rear of the bag.
▶ Place Jumbo Backpack on luggage rack.
▶ Loop the straps around the sissy bar/backrest in a way that is secure.
▶ Locate the 2 long straps & attach them to the lower D-rings on the front of the bag.
▶ Loop these straps around the directional indicator bar or other secure mounting location below the bag, & then attach the other
end to the lower D-rings on the back of the bag; the clips can be individually tightened by pulling on the loose ends.
▶ Excess strap material should be knotted.
Note:
Backpack may be carried on the shoulders while not riding by connecting the long straps to the 4 D-rings on the back of the bag.
142293-00
INSTALLATION INSTRUCTIONS
BAG INSTALLATION: 50030-00 Universal Luggage System
INSTALLATION CONTINUED ON REVERSE SIDE
10/14