Caraudio-Systems C2-MK-CD Handbuch - Seite 14
Blättern Sie online oder laden Sie pdf Handbuch für Zubehör für Kraftfahrzeuge Caraudio-Systems C2-MK-CD herunter. Caraudio-Systems C2-MK-CD 18 Seiten. C.logic interface for bmw professional navigation systems without idrive
Seite drucken3.5.1. Audio settings
It is necessary to set some audio settings to use the c.LOGiC interface.
On vehicles WITH factory CD-changer
set the audio setting to "CD" and "CD EMU OFF".
On vehicles WITHOUT factory CD-changer
set the audio setting to "CD" and "CD EMU ON".
3.5.2. Assigning device control for connected AV-sources
Select control levels setup "CH1:RCxx" for AV1 and "CH2:
RCxx" for AV2 in the "VI SETTINGS" menu and assign
related IR-codes as described in device control table by
turning the right knob.
Note: The IR-control channel CH1 is preset to RC-Code 41
compatible DVB-T tuners and CH2 is preset to RC-Code 09
for the usbLiNK.
3.5.3. Rear-view camera function
Set the rear-view camera setting to "RVC: ON" to use the
rear-view camera input of the c.LOGiC. After the setting
the automatic switching to rear-view camera input is
activated when reverse gear is engaged.
Note: After the reverse gear is disengaged, the monitor
stays on camera video until the vehicle reaches a speed of
10 km/h. To leave the camera video press the right knob.
4. Operation
4.1.
Activation of the video-in-motion function
The video-in-motion function is permanently active without disturbing the navigation
performance.
Version 10.05.2012
C2-MK-CD