Caraudio-Systems DT1 Handbuch - Seite 7
Blättern Sie online oder laden Sie pdf Handbuch für TV-Tuner Caraudio-Systems DT1 herunter. Caraudio-Systems DT1 16 Seiten. For bmw professional navigation systems ccc and cic with idrive
Seite drucken2.2.
Installation of CAN-box TV-436
Disconnect female Quadlock connector from the back of the navigation computer.
Remove MOST®-insert from the factory harness female Quadlock connector.
Plug MOST®-insert into male MOST®-connector shell of harness C3C-BMW0x.
Plug female Quadlock connector into male Quadlock socket of harness
C3C-BMW0x.
Plug male MOST®-connector into female MOST®-socket of C3C-BMW0x.
Plug female Quadlock connector of C3C-BMW0x into male Quadlock socket of the
navigation computer.
Connect harness TV-BMW01 to the 8pin Molex connector of CAN-Box TV-436.
Note: Vehicles without MOST®-components, which means without factory CDC, without
factory phone or other MOST®-components have optical leads at the navigation computer,
but it can be possible that the optical ring is not closed at the diagnostic connector in the
glove compartment. In this case a connector bridge for optical wires is necessary.
Version 22.07.2014
DT1-CXC-TV1