Advanced Mxp-536 Handbuch - Seite 7

Blättern Sie online oder laden Sie pdf Handbuch für E/A-Systeme Advanced Mxp-536 herunter. Advanced Mxp-536 16 Seiten. Peripheral zone card

Seite drucken

2.4 Wiring Configuration

2.4.1 Loop (Class A) Zone Wiring

0V
24V
PBUS A
PBUS B
COM
NC
NO
COM
NC
NO
COM
NC
NO
PSU

2.4.2 Radial (Class B) Zone Wiring

0V
24V
PBUS A
PBUS B
COM
NC
NO
COM
NC
NO
COM
NC
NO
PSU
Notes:
-
For compliance with EN54-13 an AEOL (Exp-006) must be used with radial zones, regardless of the type of
base in use. Please note that not all detection devices are compatible with the AEOL (Exp-006) module
(please refer to
-
If an AEOL (Exp-006) is in use the EOL configuration must be set to 6K8.
-
Up to three 4-wire zones can be supported using the on-board relays (in PBUS mode)
-
If operating in Stand Alone Mode the on-board relays become purpose specific and therefore cannot be
used in 4-Wire device configurations.
www.advancedco.com
Loop (Class A) Zone Using Standard Bases
+
+
-
-
Loop (Class A) 4 Wire Device Zone
Without Zone Supply Monitoring
Radial (Class B) Zone Using Standard Bases
Radial (Class B) Zone Using Diode Bases
+
+
+
-
-
-
Radial (Class B) 4 Wire Device Zone
Without Zone Supply Monitoring
+
+
-
-
EOL
AEOL
Exp-006
+
EOL
-
7