1byone 102UK-0002 Gebrauchsanweisung - Seite 2

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Zubehör 1byone 102UK-0002 herunter. 1byone 102UK-0002 5 Seiten.

Seite drucken

Thank you for purchasing 1byone Wireless Doorbell.

Please read this instruction manual before use to ensure

safe operation.

1. Package Contents:

1 x Push Button

1 x 3V Battery for Push Button (Type: CR2032)

3 x Wall plugs

1 x Double-sided Adhesive

If any package contents are visibly damaged or missing,

please immediately contact 1byone Customer Service at

[email protected] for assistance.

2. Parts Names:

PAIR

MODE

VOL

3 4 5 6

▲ Receiver

1 x Doorbell Receiver

3 x Screws

1 x Instruction Manual

▲ Push button

1. Speaker

2. LED indicator

3. Ringtone selector button

4. Pair button

5. Sound and flash button

6. Volume button

7. Name plate position

8. Rain cover

9. Push button

Parameters:

Voltage of receiver

Voltage of push button

Frequency

Operating range

Power consumption:

Receiver's ring volume

Working temperature

3. Power Supply:

Receiver: The receiver is powered by 3 x AA batteries, Please

insert the battery using the following procedure:

a) Press the buckle on the battery compartment cover and

remove the battery compartment cover at the back of

the receiver.

b) Insert the 3 x AA batteries using the correct polarity to

eliminate the danger of fire.

c) Reattach the battery compartment cover.

Push button: The push button is powered by a 3V battery

(Type: CR2032). Please insert the battery using the

following procedure:

a) Take off the rain cover from the push button.

b) Twist off the back cover of the push button.

c) Insert the 3V battery (type CR2032) into the battery

compartment, making sure the battery surface marked

with a "+" is facing upwards.

d) Put back the back cover and tighten it, making sure it is

securely closed to ensure the waterproof IP 44 protection.

DC 4.5V (3 x AA batteries)

DC 3V (CR2032 battery)

433.92MHz+100KHz

150m/492ft (without obstacles)

Receiver: ＜0.3W

Push button: ＜10mA

＞ 85dB within 0.5m/1.6ft

-20℃~50℃