Amplitec C23S-EGSM Benutzerhandbuch - Seite 17
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Wiederholer Amplitec C23S-EGSM herunter. Amplitec C23S-EGSM 19 Seiten. 23dbm single wide band repeater
Seite drucken
range 100~240V, frequency range 50~60Hz. Output DC is 12V 2A.
GND：grounding.
4.4 Start the Repeater
Figure 4.4 repeater display and its control panel
After ensuring that the repeater is installed properly, that power supply and
GND meet the requirements, turn on the repeater. After 5 seconds, repeater
initialization is completed and it enters the normal working state.
Observe and adjust alarm display (methods of adjustment, please refer to
section 3.6 of this manual)
If alarm is not removed with correct adjustment methods, please contact your
supplier.
After test the effect of the repeater with test mobile phone, the procedure of
repeater installation is completed.