Advanced MxPro 5 Handbuch - Seite 11
Blättern Sie online oder laden Sie pdf Handbuch für Aufnahmegeräte Advanced MxPro 5 herunter. Advanced MxPro 5 14 Seiten. Pager interface
Auch für Advanced MxPro 5: Handbuch (10 seiten), Anwendungshinweis (10 seiten)
Seite drucken
2.6 Pager Zones
Each Pager Address must be configured to
from which zones the events will be sent to the
This can be used to prevent unnecessary or
events being sent to all pagers or it can be used
only those zones that are relevant to a specific
For example, a nurse pager can be configured
only those zones concerned with the hospital
covered by the nurse.
Up to two ranges can be defined.
Right Click in the table or on a specific address
Delete / Edit and entry.
A new pop-up dialogue box is shown.
Define the new pager number and address
required. See example below.
2.7 Upload Communications
To upload the configuration data to the pager interface, first
cable from the base card and plug in the upload / download
shown opposite.
Click on the "Connect to Target" button and when
communications is established, click on the "Upload" button to
data.
On completion, remove the upload / download lead and re-fit
from the base card.
www.acornfiresecurity.com
If only one
range is
then use "Zonal Range 1" only.
The maximum zone range is 1 – 2000.
www.acornfiresecurity.com
define
pager.
unwanted
to define
person.
to cover
wards
to Add /
ranges as
address
required,
unplug the
lead as
transfer the
the lead
Pager Interface
11