Comcast HOW4319 Schnellstart-Handbuch - Seite 2
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Gateway Comcast HOW4319 herunter. Comcast HOW4319 4 Seiten. Wireless gateway
Seite drucken
Step 1
Plug in & power up
If this device is replacing an existing modem/Wireless Gateway please disconnect it
before proceeding.
A
Place your Wireless Gateway near a
cable wall outlet, in a central location,
away from windows and external walls.
B
Screw one end of the coax cable to the
Cable In/RF In port on your Wireless
Gateway. Screw the other end to the cable
wall outlet or one of the ports on the
splitter. Make sure these connections are
finger tight.
To connect your splitter to the cable wall
!
outlet screw one end of a coax cable to the
side of the splitter with the single port and
the other end to the cable wall outlet.
C
Plug the power cord into the back of your
Wireless Gateway. Plug the other end into
an electrical outlet.
If your Wireless Gateway doesn't turn on,
!
make sure your electrical outlet works.
Also, check if your electrical outlet is
controlled by a wall switch.
D
Wait until the Power, US/DS, and Online
lights remain solid for 1 minute. The lights
may flash for up to 20 minutes, and your
Wireless Gateway may reboot. When these
lights STOP flashing, move on to Step 2.
If the lights do not stop flashing after
!
20 minutes, tighten the cables. Then
try moving your Wireless Gateway to a
different cable wall outlet.
For XFINITY Voice customers
If you have XFINITY Voice service,
connect your telephone to the Tel 1
connection on your Wireless Gateway
using a telephone cord (not included).
If you ordered a battery with your service,
please use the instructions packaged
with the battery to install it.
If connecting multiple devices to one cable
!
wall outlet, you will need to use a splitter.
Power
US/DS
Online
2.4 GHz
5 GHz
Flashing = Wait
Power
US/DS
Online
2.4 GHz
5 GHz
Steady = Ready