Doyon WM45 Betriebsanleitung - Seite 7

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Messgeräte Doyon WM45 herunter. Doyon WM45 13 Seiten. Doyon wm45 water meter: operating instruction

Seite drucken

3.2.1

Initial recipes setting

Set the program number (ex.: P01, P02 etc.) appearing on the lower display (9) (PROGR. lights up) and

then the desired water quantity, appearing on the upper display (16). To store also the temperature, press

key and proceed as for manual operation. It is possible to exit from a recipe setting dosing the recipe

itself (press START), setting a new recipe (press P...). or automatically after 10 seconds: in all these

cases the recipe is stored.

Warning: recipe numbers from 1 to 9 must always be set using the format: 01, 02, etc...

3.2.2

With recipes already programmed:

To recall a recipe, enter the desired number (for example P28), which is shown for 3 seconds on the lower

display (9), while the upper displays show the relevant quantity and temperature.

Press START to carry out the dosing.

If modifications are required, set the new quantity and/or temperature as explained above.

To stop water delivery manually at any time press the STOP/C key. After that on the display (16) the

delivered water quantity flashes; to resume dosing press again the START key, otherwise, pressing the

STOP/C key, the quantity is cleared and it is possible to set a new quantity.

The equipment is fitted with an auxiliary precision electronic thermometer with a mobile probe (6), usable

at distances up to 5 metres.

Temperature readout on the display is continuous (9), except when the program number appears.

3.4 SPECIAL FUNCTIONS

•

With the double pressure of the P key, the device shows the succession of the recipes stored in

memory.

•

Holding the

key for 10", the total amount of m³ delivered by the machine (with a decimal

number) is indicated: see example in Figure 9.

3.2 OPERATION WITH 80 PROGRAMS

3.3 USE OF EXTERNAL PROBE

Figure -9