AmpliVox AirVox S690 Benutzerhandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Lautsprechersystem AmpliVox AirVox S690 herunter. AmpliVox AirVox S690 12 Seiten. Battery powered pa system with bluetooth

Seite drucken

WIRELESS SPEAKER TRANSMITTER S1692T (OPTIONAL EQUIPMENT)

OPERATES ON DIFFERENT FREQUENCIES THAN AMPLIVOX WIRELESS MICROPHONE / RECEIVER

16 CH UHF WIRELESS SPEAKER TRANSMITTER

Must be installed into S690 / SW690 / SW695

FEATURES

•

Channel Display (A)

•

TX - Radio Frequency Indicator (B) lights when turned on

•

AF - Audio Frequency Indicator (C) lights when transmitting

•

Select Buttons - Manual Channel Selection (D) Up / Down

•

Power / Volume Control (E)

WIRELESS SPEAKER SETUP

• The transmitter has its own POWER / VOLUME Control (E). First make sure that you have installed the UHF an-

tenna. Turn Main Power On of the S690 / SW690 / SW695, then turn transmitter Power On (E). A Frequency Chan-

nel will appear in the Channel Display (A). Press Select Buttons (D) to select a channel. Channel number must

match channel number on wireless receiver of the AirVox Speaker. EXAMPLE: Select Channel 10 on transmit-

ter (S1692T) and select Channel 10 on the speaker receiver of the S1274. The AF LED will light when receiver

of the S1274 sees the transmitting signal. RF LED of receiver (S1274) will light when channels are matched and

receiving a signal.

OPERATE

• S690 / SW690 / SW695: turn on main power / wireless microphone receiver / wireless speaker transmitter / wire-

less microphone.

• S1274: turn on main power / wireless speaker receiver.

• To start, set all volume controls of the wireless devices to MID POINT. Test speaking into the wireless microphone

and adjust level of main volume controls first to the desired level. If you feel that you need to increase sound level

then adjust levels of the wireless devices.

S690 / SW690 / SW695

Model SW690

Shown With Wireless Speaker

Transmitter Installed

UP TO 300 FEET

S1274