AmpliVox SB8001 Benutzerhandbuch - Seite 7
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Lautsprechersystem AmpliVox SB8001 herunter. AmpliVox SB8001 8 Seiten. With bluetooth battery powered pa system
Seite drucken
COMPACT DISC / MEDIA PLAYER OPERATION
FUNCTIONS
•
POWER: Press Power button to turn CD Player on. This
knob increases the output level when turned clockwise,
and decreases the volume when turned counter clockwise.
This is in addition to the main volume control function.
•
PLAY/PAUSE: Starts playback of the current selection,
and also stops the selection when pressed during play-
back. When the button is pressed again, playback resumes
at the point where the selection was stopped.
• STOP: Press to completely stop the CD from playing.
Pressing the (play) button will start the CD from the begin-
ning of the first selection on the disk
• FOLDER BUTTONS: Select which folder in USB or SD
storage devices to play. Down
folder or selection, UP
folder or selection.
• SKIP BUTTONS: Down
selection, UP
skips forward to the next selection.
Hold button while song is playing and will fast-forward.
REMOTE CONTROL
The remote control for the SW800 is used only to operate the
controls of the Media Player ONLY from the backside (control
side). The remote control can be used up to 50 feet from player.
Must be in direct line of sight for best results.
•
REMOTE: To operate the CD player or SD / USB reader
with the remote control, the button on the remote la-
beled device you wish to play must be pressed first.
Once the button is pressed, all buttons will continue to
control their respective functions on the CD / Media Player
until one of the other input buttons is pressed.
•
See FUNCTIONS above for explanation of buttons.
BLUETOOTH MODULE
PAIRING WITH A BLUETOOTH DEVICE
•
The Bluetooth® receiver has its own power /
volume switch. Before turning receiver on, the
main power for the PA must be on.
•
Rotate switch clockwise to turn on. Once
turned on you will hear a short music sound
confirming that it is now on.
•
The status LED will begin to flash RED indicat-
ing that you are now ready for pairing your
Bluetooth device.
•
You need to first enable Bluetooth on you de-
vice. When enabled you will be in the
"discover" mode. You will see a list of devices.
Choose "AmpliVox" or "AmpliVox S1500".
The Bluetooth® word mark and logo is a registered trademark owned by Bluetooth SIG, Inc. and any use of such marks by AmpliVox Portable Sound
Systems is under license.
.
backs up on the current
moves forward on the current
skips back to the previous
CONTINUED
•
PROGRAM (PROG): Used to program order of songs to
play on CD. Press button. PROG lights up on display.
Rotate POWER/VOL knob to song number. Press SHUF
to confirm. Repeat to program another song. Press PLAY
to start program order. Press Program button to cancel
function.
•
REPEAT: Song that is currently playing, REPEAT lights
up on display or repeat all CD tracks, ALL lights up.
•
EJECT: Press button. After the CD has stopped playing,
CD disk will eject from the player.
•
MODE: SD /USB/CD Button selects between SD, USB
and CD playback. Function lights up on display when
media is inserted into slot..
•
SHUFFLE (SHUF): Random playback of all music
tracks.on CD, SD Card, or USB Thumb Drive. SHUF will
light up on display.
•
MUTE: Press to silent music but will continue to play.
MUTE will light up on display. Press to release MUTE.
•
If asked for CODE or PIN NUMBER use "0000."
•
Once your device is "paired / connected" the
status LED will stop flashing and turns GREEN.
•
You can now stream audio from your device to
the PA.
•
The three control buttons, in the center, can be
used to Start- Pause / Advance / Back, your
streaming music from your device.
•
Adjust volume to desired level using Main Vol-
ume Control / Bluetooth Receiver
Volume Control and your device volume
control.
7