Follett REF2 Handbuch für Installation, Betrieb und Wartung - Seite 4

Blättern Sie online oder laden Sie pdf Handbuch für Installation, Betrieb und Wartung für Kühlschrank Follett REF2 herunter. Follett REF2 19 Seiten. High-performance compact refrigerators

Seite drucken

Installation ––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Installing Foot Pads - Required

CAUTION!

Use caution when tipping the refrigerator during foot pad installation. DO NOT EXCEED 30° angle.

Tipping more than 30° can result in compressor malfunction.

1. Remove the foot pads (4) from the plastic bag packed inside the

refrigerator.

2. Carefully tip the refrigerator back, ensuring that it can not fall, to

expose the four foot pad holes (Fig. 1).

3. Position the foot pad over the foot pad hole and press the

center of the foot pad until it is fully seated. The foot pads

extend 1/8" (3.2 mm) below the base of the refrigerator (Fig. 1).

Installing Shelves - Required

1. Remove shelves and shelf brackets packed inside refrigerator.

(If ordered, fi nd additional shelf accessory in separate box.)

2. Install shelf brackets in pilasters (insert top tab, squeeze and

push in lower tab) (Fig. 2).

Installing Glycerine Solution in Product Simulation Bottle - Required

1. Remove the 60 ml bottle from the bracket located in the upper left corner of the refrigerator.

2. Remove the top and fi ll the bottle with a 50/50 solution of glycerine and water.

3. Replace the top (and probe).

4. Reinsert bottle into the bracket.

Note: The probe monitors product temperature and must be installed for proper display and alarming.

REF1/REF2 Compact Refrigerators

Fig. 1

Fig. 2