Amprobe LH41A Benutzerhandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Messgeräte Amprobe LH41A herunter. Amprobe LH41A 8 Seiten. Clamp on ammeter

SAFETY

This product conforms to the latest directives concerning

safety and electromagnetic compatibility.

• European Low Voltage Directives 73/23/EEC and 93/68/

EEC

• European EMC Directives 89/336/EEC and 93/68/EEC

Safety Standards

BSEN600-: 200. General Requirements.

Safety requirements for electrical equipment for

measurement, control and laboratory use.

BSEN600-2-032: 2002. Particular requirements for hand

held current clamps for electrical measurement and test.

EMC Standards

RF Susceptibility

EN50082-: 992 3V/m Residential, Commercial and Light

Industry

RF Emissions

EN5008-: 992 Residential, Commercial

and Light Industry

FCC Part 5 Class B

This product is designed to be safe under the following

conditions:

− indoor use

− altitude up to 2000m

− temperature 0°C to +50°C

− maximum relative humidity 80% for

temperatures up to 3°C decreasing linearly to

0% relative humidity at 50°C.

Use of the meter on uninsulated conductors is limited to

300V RMS or DC and frequencies below kHz.

This meter complies with the requirements of the above

safety standard for 300V Cat III Pollution degree 2

Safety in its use is the responsibility of the operator who

must be a suitably qualified or authorised person.

Users of this equipment and or their employees are

reminded that Health and Safety Legislation require

them to carry out valid risk assessments of all electrical

work so as to identify potential sources of electrical

danger and risk of electrical injury such as from

inadvertent short circuits.