Amprobe MT-10 Benutzerhandbuch - Seite 12

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Messgeräte Amprobe MT-10 herunter. Amprobe MT-10 13 Seiten. Moisture meter

MAINTENANCE AND REPAIR

If there appears to be a malfunction during the

operation of the meter, the following steps should be

performed in order to isolate the cause of the problem.

1. Check the battery. Replace the battery

immediately when the "

the LCD.

2. Review the operating instructions for possible

mistakes in operating procedure.

Except for the replacement of the battery, repair of the

meter should be performed only by a Factory Authorized

Service Center or by other qualified instrument service

personnel. The front panel and case can be cleaned with

a mild solution of detergent and water. Apply sparingly

with a soft cloth and allow to dry completely before

using. Do not use aromatic hydrocarbons or chlorinated

solvents for cleaning.

Requires one standard 9V battery. Battery compartment

is located on the bottom of the meter

1. Lift clip to access the battery compartment.

2. Connect a new 9V battery.

3. Replace the cover and securely snap in place. The

meter is now ready for use.

" symbol appears on