Amprobe 15XP-A Benutzerhandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Multimeter Amprobe 15XP-A herunter. Amprobe 15XP-A 19 Seiten. Compact digital multimeters

Product Maintenance

To clean the meter, use a soft cloth moistened with water. To avoid damage to the

plastic components do not use benzene, alcohol, acetone, ether, paint thinner,

lacquer thinner, ketone or other solvents to clean the meter.

If the meter appears to operate improperly, check the following items first.

1. Review the operating instructions to ensure the meter is being used properly.

2. Inspect and test the continuity of the test leads.

3. Make sure the battery is in good condition. The low battery symbol M

appears when the battery falls below the level where accuracy is guaranteed.

Replace a low-battery immediately.

4. Check the condition of the fuses if the current ranges operate incorrectly.

Battery and Fuse Replacement

To avoid electrical, shock remove the test leads from both the

meter and the test circuit before accessing the battery or the

fuses.

To replace the fuse:

1. Remove the 2 rear-case screws.

2. Separate the case.

3. Remove and replace the 2 A fuse (15XP-A or 35XP-A) or 0.315 fuse (5XP-A).

4. Reassemble the meter.

Fuse:

Fast Blow 2 A/1000 V, minimum interrupt rating 30 kA (6 x 32 mm)

(Amprobe

FP200).

Fast Blow 0.315 A/1000 V minimum interrupt rating 30 kA (6.3 x 32 mm)

(Amprobe

FP300)

XWWARNING

See Figure

-14-