DPA 6066 Handbuch - Seite 8

Blättern Sie online oder laden Sie pdf Handbuch für Kopfhörer DPA 6066 herunter. DPA 6066 9 Seiten. Subminiature headset

General maintenance

The grid protects the tiny 3 mm capsule.

The mic cap can easily be removed

The tiny grid holes add to the mics'

for cleaning by pulling it gently. When

resilience to water and sweat.

you reattach it, you will feel and hear a

"click" when the cap is secured.

DUA9301-B (optional)

DUA9301-F (optional)

The orange, protective cap shields the

mic head when putting on make-up,

hairspray, etc. Remove this cap before

use.

The cable is usually longer than required. Make sure that excessive cable is wound up in soft figure-of-eight loops

(preferably 6-8 cm (2.5-3 in) diameter) and avoid kinks in the cable.

Use organic oil (e.g. olive oil) or lukewarm distilled water to remove residue from tape, glue or makeup on the

cable. Do not bend the cable or rub it harshly, it may stress the inner cores of the cable and cause them to break

over time.

The headset microphone is resistant to high levels of humidity and water. For optimum performance the

microphone capsule should be kept dry. Keep the microphone away from exposure to cleaning fluids and do not

use spray or fluids containing chemicals that could remove static electricity on or close to the microphone. This

could cause permanent damage.

Rinsing the microphone capsule must be done only with demineralized water.

The microphone must be left to air-dry afterwards.

Please refer to our instructions and videos explaining the cleaning process.

dpamicrophones.com/wash-miniature