Follett 6102 Erste Schritte - Seite 2

Blättern Sie online oder laden Sie pdf Erste Schritte für Barcode-Leser Follett 6102 herunter. Follett 6102 8 Seiten.

Follett 6102 Erste Schritte
Getting Started with the Follett 6102

Installation

1. Carefully insert the modular connector into the bottom of the base unit
until you feel it click in place (Figure 1). Connect the other end to your
computer's USB port. (Figure 2).
NOTE: Your 6102 scanner uses the USB connection with your computer
to charge its battery. To properly charge, your computer must be
turned on.
2. Prior to first use, the scanner must be linked to it's base unit. To link the
two, place the scanner in the base, and wait for the green Charge light
to begin blinking. The system will automatically link the scanner to the
base unit.
NOTE: Only one scanner at a time may be linked to a base unit.
3. Test your scanner by using the following procedure:
On your workstation, launch a text editing program such as
SimpleText or Notepad.
Scan the test barcode below.
Check to see if the number 12345 appears in the text-editor. If the
number does not appear, contact Follett Technical Support at
(800) 323-3397.
Page 2 of 8
Modular
Connector
Figure 1
©2014 Follett School Solutions, Inc. All Rights Reserved.
Figure 2